| Parts that must be saved for reuse |
| Turn signal wiring harness and connectors, front right and left |
| Rubber gromet from the oil tank filler neck |
| The BMW emblem and grill piece from the front side covers R & L |
| Two sheet metal nuts from the Tank cover |
| Mount for the engine computer with rubber strap (o-ring) |
| Engine management computer |
| 10X110mm Allen head bolt from the front motor mount |
| 5 washers from the foot peg mounts |
| Foot peg pins, washers, springs and spacers R & L |
| Bolt, bushing and spring for the brake pedal |
| The upper mounting bolt from the rear shock |
| Brake discs with bolts and washers, front and rear |
| Rear sprocket carrier and rubber spacers |
| Rear wheel axle, washer and nut |
| Engine computer with three sheet metal nuts, rubber mount and spacers |
| Intake (modified) |
| Brake and tail lamp assembly with nuts and washers |
| Wiring harness for rear tail/brake light and rear turn signals |
| Ignition switch and two washers |
| Brake calipers front and rear |
| Horn with sheet metal nut |
| Four screws and washers from the front fender |
| Battery mount with two nuts and washers |
| Kick stand switch, snap ring, bushing, and countersunk mounting bolt |
|
Parts that must be modified
(may be included with modifications already completed) |
| Kick stand |
| Exhaust head pipe |
| Motor mount |
